www.aditgroup.com

- Compatible with latest EN standards. - Non-breaking re-settable glass (via special key). - Two parts plug-in construction with base mounted termination allows easy installation and connection. 

- Optional Deep Base For Sounder And Strobe (I-9403 / I-9404) 

- Duct probe housing for detection of smoke by sampling moving air inside the duct. - Easy maintenance as detector is mounted externally to the duct. - Pre-wired detector base 

- Manual Call Point (MCP) with Re– Settable (Non Breaking) Glass - Additional volt free contacts for local interfacing (i.e. PTZ camera preset) - Two parts plug-in construction with base mounted termination allows for easy installation and connection 

- Active End Of Line For Conventional Fire Detection Zones - It Can be used as Conventional Detector Base or Work independent with a cover - Provide detector removal indication while still enabling alarms 360° down stream of the missing device to be det 

- Diode base version for conventional detectors utilizing the Active End Of Line(AEOL) (P-9907) - Common base for C-9101/2/3/4 

- Two parts construction with base mounted termination allows easy installation - Strobe provided by high intensity LED cluster 

- Two of output contacts, open circuit when operating; contact closed and self lock when alarming - New scattering technology - Unique labyrinth design protect against insects, dust, light infiltration 

- Conventional Base Mounted Sounder - Can be used as a common base of detector or stand alone with a cover. - Compatible sound with I-9403 / C-9403 Sounder Flasher and I-9404 / C-9404 Sounder. 

- Conventional combined flashing high intensity LED beacon and sounder - Two part plug-in construction with base mounted termination allowing easy installation and connection 

- Self contain Optical Smoke detector and alarm sounder - With test and reset button - 9v operated 

- Available for LPG, Natural Gas & Coal Gas - Built - In Relay contacts for Gas Valves etc. - Manual Reset and Control (On/Off) of Relay 

- CE Certified product - Two part construction with base mounted for easy installation - Two addresses tones (Alert & Evacuate) 

- CE certified product - Combine Heat + Smoke Detector - Twin LED for 360° Degree viewing 

- IP 65 protective enclousure for manual call points 

- Sensitive Ultraviolet Sensor that detects the UV rays Produced by a flame - Aesthetically pleasing low profile design - Dust / Corrosion / Humidity Resistant 

- LPCB, CE certified product - Rate of rise Heat Detection - Twin LED for 360° degree viewing 

- Available for LPG, Natural Gas & Coal Gas (Specify on order time) - Built-in relay contacts for Gas Valves / Extract etc. - Built-in Sounder with 2 stage alarm 

- Fixing & Terminating of Conventional Detectors with directional gaps. - Compatible with GST conventional detectors using 4K7 Ohm resistor end of line.(EOL) - Common base for GST C-9101/2/3/4 

- Range 8-100 Meters, - 2 selectable levels of sensitivity adjustment. - Ideal for Atriums, Warehouses, Shopping Centers, Airport Terminals etc.