| Features: |
 |
Fully Confirms IS 2189 |
|
Modular Construction. |
|
Battery Backup With Built-in Charging. |
|
Error Free Fire / Fault Status in Unambiguous
Colored LED indication. |
|
Low Battery / Battery Fail Warning Audio
/ Visual indication. |
|
AC fails audio /Visual warning. |
|
Charger fails audio /Visual warning. |
|
Relay Output For Actuators. |
|
Lamp test facility. |
|
Earth fault indication. |
|
One Man Walk Test Facility. |
|
Compatible to all Types of Conventional
Detectors. |
|
Twin RED LED indicator for fire. |
|
Zone Isolation Facility With Loop Voltage
Cut off. |
|
24 V DC output for External notification
devices (Sounder , Bell , etc) |
|
User, Installer & Maintenance Friendly. |
|
Optional Loop Sounder. |
|
Optional Twin LED for MCP Activation. |
|
Optional RS 232 Communication Facility. |
|
Optional RS 485 Communication Facility
For Remote Annunciation Panel. |
| |
| Specification : |
|
No. of Zones : 20 Zones |
|
Primary Power : 230v AC, 50 Hz |
|
Standby Power : 24v DC (2nos. of 12v,
7Ah S.M.F.Battery) |
|
Zone Input : 2 Wire loop with 4K7 End
On Line Resistors |
|
Standard Indications : System
On /AC On /Battery On / Low Battery/Charger
On |
|
Standard Indications : System On /AC
On / Battery On / Low Battery/Charger On |
|
Operating Voltage : 24v DC |
|
Normal Loop Voltage : 20.4v DC |
|
Operating Current : 80mA plus 4.2mA per
Zone |
|
Open Threshold Current : 4.2 mA |
|
Short Circuit Threshold Current : 40
mA |
|
Standby Threshold Current : 8.2 mA (EOL
Current + Detector’s Current) |
|
Alarm Output : Common Output (Non Supervised)
:1A (Max) |
|
Alarm Current : 20 - 35mA |
|
Operating Conditions : -10° to 45°C,
30 - 95 % RH |
|
Dimension : 350 (L) × 250 (H) × 100
(D) mm |
