| Features: |
 |
Fully Confirms IS 2189 |
|
Modular Construction. |
|
Battery Backup With Built-in
Charging. |
|
Error Free Fire / Fault
Status in Unambiguous Colored LED indication. |
|
20×4 LCD Dot Matrix
Display. |
|
Lox Battery / Battery Fail
Warning Audio / Visual Display. |
|
Charger ON indication. |
|
A.C Fail Audio / Visual
Warning. |
|
Relay Output For Actuators. |
|
Output For Remote Repeater
Panel. |
|
Lamp Test Facility. |
|
One Man Walk Test Facility |
|
Compatible to all Types
of Conventional Detectors. |
|
Separate Twin LED Indication
For Fire. |
|
Zone Isolation Facility
With Loop Voltage Cut off. |
|
On Site Location Programming
Facility. |
|
User, Installer & Maintenance
Friendly. |
|
Password Protection. |
|
24v DC Output For External
Notification Devices.[Sounders, Bell etc.,] |
|
Optional Loop Sounder. |
|
Optional Twin LED for MCP
Activation. |
|
Optional RS 232 Communication
Facility. |
|
Optional RS 485 Communication
Facility For Remote Annunciation Panel. |
| |
| Specification: |
|
No. of Zones : 16 Zones |
|
Primary Power : 230v AC,
50 Hz |
|
Standby Power : 24v DC (2nos.
of 12v, 7Ah S.M.F. Battery) |
|
Zone Input : 2 Wire loop
With 4K7 End Of Line Resistors[EOL] |
|
Standard Indications
: System On /AC On /Battery On / Low Battery/Charger
On /Walk Test / Auxiliary Trip |
|
Operating Voltage : 24v
DC |
|
Normal Loop Voltage : 20.4v
DC |
|
Operating Current : 80mA
plus 4.2mA per zone |
|
Open Threshold Current :
4.2 mA |
|
Short Circuit Threshold
Current : 40 mA |
|
Standby Threshold Current
: 8.2 mA (EOL Current + Detector’s
Current) |
|
Alarm Current : 20-35 mA |
|
Operating Conditions : -10° to
45°C, 30 - 95 % RH |
|
Dimension : 350 × 300 × 100
(all are in mm)s |
