| Features: |
 |
Fully Confirms IS 2189 |
|
Modular Construction. |
|
Battery Backup With Built-in
Charging. |
|
Error Free Fire / Fault
Status in Unambiguous Colored LED indication. |
|
Low Battery / Battery Fail
Warning Audio / Visual indication. |
|
AC fails audio /Visual warning. |
|
Charger fails audio /Visual
warning. |
|
Relay Output For Actuators. |
|
Lamp test facility. |
|
Earth fault indication. |
|
One Man Walk Test Facility. |
|
Compatible to all Types
of Conventional Detectors. |
|
Twin RED LED indicator for
fire. |
|
Zone Isolation Facility
With Loop Voltage Cut off. |
|
24 V DC output for External
notification devices (Sounder , Bell ,
etc) |
|
User, Installer & Maintenance
Friendly. |
|
Optional Loop Sounder. |
|
Optional Twin LED for MCP
Activation. |
|
Optional RS 232 Communication
Facility. |
|
Optional RS 485 Communication
Facility For Remote Annunciation Panel. |
| |
| Specification : |
|
No. of Zones : 32 Zones |
|
Primary Power : 230v AC,
50 Hz |
|
Standby Power : 24v DC (2nos.
of 12v, 7Ah S.M.F.Battery) |
|
Zone Input : 2 Wire loop
with 4K7 End On Line Resistors |
|
Standard Indications
: System On /AC On /Battery On / Low Battery/Charger
On |
|
Standard Indications : System
On /AC On / Battery On / Low Battery/Charger
On |
|
Operating Voltage : 24v
DC |
|
Normal Loop Voltage : 20.4v
DC |
|
Operating Current : 80mA
plus 4.2mA per Zone |
|
Open Threshold Current :
4.2 mA |
|
Short Circuit Threshold
Current : 40 mA |
|
Standby Threshold Current
: 8.2 mA (EOL Current + Detector’s
Current) |
|
Alarm Output : Common Output
(Non Supervised) :1A (Max) |
|
Alarm Current : 20 - 35mA |
|
Operating Conditions : -10° to
45°C, 30 - 95 % RH |
|
Dimension : 350 (L) × 250
(H) × 100 (D) mm |
