Detectrors

Intelligent Optical Smoke Detector (I 9102)
Aesthetically pleasing low profile design
8 Bit intelligent processor with A/D converter
Built in algorithm maps for false alarm rejection
More..

Intelligent Dual Heat Detector (I 9103)
Fixed Temperature and Rate of Rise Detection
Aesthetically pleasing low profile design
8 Bit intelligent processor with A/D converter
More..

Intelligent Multi Sensor(I-9101)
Combining all the features of the I-9102 Optical and the I-9103 Dual Heat Detector to provide the ultimate cover for life safety systems.
Ideal alternative to Ionisation detectors.
Adjustable Smoke Detection Sensitivity by Handhold Programmer
More..

Intelligent Ultraviolet Flame Detector (I-9104)
Sensitive Ultraviolet sensor that detects the UV rays produced by a flame
Not effected by sunlight.
Aesthetically pleasing Low profile design
More..

GST Duct Probe (DP-9100)
Duct probe housing for detection of smoke by sampling moving air inside the duct.
Easy maintenance as detector is mounted externally to the duct.
Pre-wired detector base
More..

Intelligent Linear Beam Detector (I-9105)
Suitable for detection coverage of Atriums and Warehouses, Factories, Tunnels.
Detection range 10 to 100 meters.
Alignment indication LED’s and adjustable pivot base for easy beam alignment
More..

Intelligent Reflective Beam Detector (I-9105 R)
Range 8-100 Meters,
2 selectable levels of sensitivity adjustment.
Ideal for Atriums, Warehouses, Shopping Centers, Airport Terminals etc.
More..

Intelligent Linear Cable Heat Detector (I-9106)
Fixed temperature linear cable heat detector.
Typically used to detect overheat in high power cable trays.
Configurable with single or dual detection cable
More..

Addressable Combustible Gas Detector (I-9602LW)
Available for LPG, Natural Gas and Coal Gas. (Please specify at time of order)
Built-in relay contacts for control of Gas Valves / Extract etc
Built-in sounder with 2 stage alarm.
More..

Short Circuit Isolator (C-9503)
Isolates Faulty Part of the Loop in the event of a Short Circuit.
Automatically Resetting once the Fault has cleared
LED Status Indicator
More..

Base Mount Short Circuit Isolator (C-9504)
Replace Standard detector base (CZ-03)
Cost effective installation without the need for additional cabling
Isolates Faulty Part of the Loop in the event of a Short Circuit.
More..

Addressable Manual Call Point (I-9201)
Addressable Manual Call Point (MCP) with re-settable (non breaking) glass
Additional volt free contacts for local interfacing (i.e. PTZ camera preset)
Two part plug-in construction with base mounted termination allows for easy installation and connection.
More..

Addressable Manual Call Point (I-9202)
Compatible with latest EN standards.
Non-breaking re-settable glass (via special key).
Two parts plug-in construction with base mounted termination allows easy installation and connection.
More..

Addressable Sounder Beacon (I-9401)
Addressable combined flashing high intensity LED beacon and sounder
Two part plug-in construction with base mounted termination allowing easy installation and connection
Electronically addressed
More..

Addressable Sounder (I-9404)
Identical in appearance and features to the i-9403 but without the strobe element
More..

Addressable Sounder and Strobe (I-9403)
Two parts construction with base mounted termination allows easy installation
Evacuate only or Alert/Evacuate mode can be set through handheld programmer.
Remote start input can be used to co-operation with other systems.
More..

Addressable Sounder Base (I-9402)
Loop Powered Sounder.
Can be used as a common base of detector or stand alone with a cover.
Two addresses (one for Alert and one for Evacuate tones).
More..

Power Remote Indicator (C-9314)
Conventional Alarm Indicator with local sounder
Connects to 12 or 24VDC supply.
Dimension: 120  mm × 80 mm × 49 mm
More..

Addressable Sounder Base (I-9402)
Loop Powered Sounder.
Can be used as a common base of detector or stand alone with a cover.
Two addresses (one for Alert and one for Evacuate tones).
More..

Diode Conventional Base (DZ-03D)
Diode base version for conventional detectors utilizing the Active End Of Line(AEOL) (P-9907)
Compatible base for GST C-9101/2/3/4
More..

Intelligent Remote Indicator (I-9314)
Can be program linked to any single or group of devices
High intensity flashing LED in alarm condition
Electronically addressed
More..

Remote Indicator (C-9314 P)
Remote indicator for direct connection to detector remote indicator terminals
Compatible with:
Addressable: I-9102R Optical Detector and I-9103R Dual Heat Detector.
Conventional: C-9102R Optical Detector and C-9103R Heat Detector.
More..

Deep Base (C-94DB)
Optional Deep Base For Sounder And Strobe (I-9403 / I-9404)
More..